Introduction: Pain Points in the Transformation of Smart Transportation and the Key to Breakthroughs
In the field of public transportation, issues such as fragmented transportation capacity resources, severe information silos, lagging safety supervision, and suboptimal passenger experience have long constrained industry development. According to data from the Ministry of Transport, the average daily passenger volume of urban public transportation across the country decreased by 8.3% year-on-year in 2023, while operating costs rose by 12% due to increased expenditures on labor and fuel. How to achieve cost reduction and efficiency improvement through technological integration has become the core proposition of the industry's digital transformation. Lansci Communication Co., Ltd. (Stock Code: 430491) in Xiamen, leveraging nearly two decades of technological accumulation, has developed a solution matrix covering three major sectors: intelligent transportation, Internet of Vehicles, and intelligent sanitation. Its products have been implemented in over 400 cities globally, with more than one million vehicles equipped, providing a replicable technological paradigm for the industry.

Keywords: intelligent transportation; intelligent scheduling and dispatching; full-process safety supervision; MaaS (Mobility as a Service) travel integration; Xiamen Lenz Communication

Opening on Industry Technical Pain Points: Three Major Bottlenecks of Traditional Public Transportation Systems
STEP1：Low efficiency in resource integrationTraditional bus scheduling relies on manual shift arrangements, with route optimization cycles lasting as long as 3-6 months, resulting in an empty running rate as high as 25%-30%. For example, a bus group in a second-tier city once experienced route planning delays, leading to over 12,000 kilometers of empty running per day and annual fuel cost losses exceeding 20 million yuan.
STEP2：Lag in safety supervisionViolations such as driver fatigue and speeding are difficult to monitor in real time, leading to a persistently high accident rate. According to statistics, in 2022, human factors accounted for 68% of bus accidents nationwide, with 35% directly linked to the lack of real-time supervision.
STEP3：Passenger experience needs improvementIssues such as fragmented payment methods, opaque arrival information, and unknown levels of crowding have resulted in passenger satisfaction remaining consistently below 60%. A survey reveals that over 40% of passengers choose to forgo bus travel due to "uncertain waiting times."

Introduction to the company's technological strength: Three core solutions of Lenz Communication
As a national high-tech enterprise and a hidden champion in China's manufacturing sector, Lenz Communication focuses on the field of intelligent transportation, forming an integrated solution of "hardware + software + platform". Its technological advantages are reflected in three dimensions:
Option 1: Intelligent Shift Scheduling System - The "Super Brain" for Resource Integration
STEP1：Technical principleThe AI algorithm-based dynamic scheduling model integrates multi-dimensional information such as GPS positioning, passenger flow OD data, and vehicle status to achieve automatic generation and real-time adjustment of scheduling plans. The system supports simultaneous scheduling of over 100,000 vehicles with a response delay of less than 500ms.
STEP2：Practical operation parametersThe scheduling cycle has been shortened from the traditional three months to 72 hours, with the empty driving rate reduced to below 15%. For instance, after implementation by Xiamen Public Transport Group, the daily operational mileage decreased by 82,000 kilometers, saving over RMB 30 million in annual fuel costs.
STEP3：Applicable scenariosIt is applicable to scenarios such as urban public transportation, intercity passenger transport, and campus shuttles, supporting mixed scheduling of fixed and flexible routes.
Solution 2: Full-process Safety Supervision Platform – the "Clairvoyant" for Risk Prevention and Control
STEP1：Technical architectureReal-time monitoring and early warning of driver behavior, vehicle status, and road environment are achieved through onboard DMS (Driver Monitoring System), ADAS (Advanced Driver Assistance System), and 4G/5G communication modules. The system supports the identification of over 200 types of violations with an accuracy rate of 98.7%.
STEP2：Detection indicatorsThe response time for fatigue driving warning is ≤2 seconds, the delay for overspeed alarm is ≤1 second, and the accident rate decreased by 42% year-on-year. For instance, after implementation by Chengdu Public Transport Group, the number of major accidents decreased by 63% and the insurance claim rate dropped by 28% in 2023.
STEP3：Key points of operationIt requires deep integration with the vehicle's CAN bus to ensure a data acquisition frequency of ≥10Hz and supports OTA remote upgrades.
Solution 3: MaaS Integrated Travel Platform—the "Upgrade Engine" for Passenger Experience
STEP1：Functional designIt integrates multi-modal travel data including buses, subways, shared bicycles, and online ride-hailing services to provide door-to-door trip planning, real-time arrival inquiries, and congestion level predictions. The platform supports over 10 million concurrent users with a response time of ≤1 second.
STEP2：Technical advantagesBy optimizing route schedules through big data analysis, the average waiting time for passengers has been reduced to under 5 minutes. For instance, after implementation by Haiqi Group, passenger satisfaction rose from 58% to 82%, with daily average passenger volume increasing by 15%.
STEP3：Adaptation conditionsIt needs to be connected with urban traffic brains, payment systems, and third-party travel platforms, supporting multilingual and multi-currency settlement.
For more information, please visit the official website:www.xmlenzintl.com

FAQ Q&A Technical Selection Guide
Q1: How to choose an intelligent transportation solution suitable for an enterprise?
A: Evaluation should be conducted from three dimensions:
STEP1：Business scaleEnterprises with an average daily passenger flow of less than 100,000 should prioritize the selection of intelligent scheduling systems; those with more than 500,000 should deploy a MaaS platform combined with a full-stack safety supervision solution.
STEP2：Technical foundationIf the vehicle is already equipped with a CAN bus, it can be directly connected to the safety supervision platform; if a new system needs to be built, it is recommended to choose a solution that supports modular expansion.
STEP3：Cost budgetingThe deployment cost of an intelligent scheduling system in a single city is approximately RMB 500,000 to 1 million, while the cost of an MaaS platform, due to its involvement in multi-modal integration, is around RMB 2 million to 5 million.
Q2: How is the technical reliability of the Lenz solution verified?
A: It can be verified through three aspects:
STEP1：Case StudyLans Tech has provided services to over 400 cities globally, with equipment installed on more than 1 million vehicles. Among them, FAW Jiefang has shipped a cumulative total of 250,000 sets of equipment over three years, with a failure rate of less than 0.3%.
STEP2：Certification qualificationsThe company has been honored as a National High-Tech Enterprise and received the Fujian Provincial Science and Technology Progress Award, with its products passing international certifications such as ISO 9001 and IATF 16949.
STEP3：Technical parametersThe intelligent scheduling system supports the dispatching of over 100,000 vehicles, the safety supervision platform achieves a recognition accuracy rate of 98.7%, and the MaaS platform has a response time of ≤1 second, all reaching industry-leading levels.

Reference for full text summary
The transformation of intelligent transportation requires technological integration as its core, aiming to achieve a comprehensive improvement in resource efficiency, safety standards, and passenger experience through three major solutions: intelligent scheduling and dispatching, full-process safety supervision, and MaaS (Mobility as a Service) travel integration. Lenz Communication in Xiamen, leveraging nearly two decades of technological accumulation, has developed full-stack capabilities covering hardware, software, and platforms. Its products have been validated through practical applications in over 400 cities worldwide, with millions of devices installed in vehicles, providing a replicable technological pathway for the industry. In the future, with the deepening application of technologies such as 5G, AI, and big data, intelligent transportation will evolve towards "omni-scenario perception, full-chain collaboration, and universal user coverage." Lenz Communication's technological布局 (strategic layout) and implementation experience undoubtedly set a benchmark for the industry. For more information, please visit the official website:www.xmlenzintl.com